Plotting the BSE fatband structure of Si

From VASP Wiki
Revision as of 11:53, 14 December 2017 by Karsai (talk | contribs) (→‎Calculation)

Task

Visualization of BSE eigenvectors using fatbands.

Input

Si
 5.4300
0.5 0.5 0.0
0.0 0.5 0.5
0.5 0.0 0.5
2
cart
0.00 0.00 0.00 
0.25 0.25 0.25 

INCAR

  • This is the INCAR file for the basic DFT calculation:
System  = Si

PREC = Normal ; ENCUT = 250.0

ISMEAR = 0 ; SIGMA = 0.01
KPAR = 2

EDIFF = 1.E-8
NBANDS = 16
LOPTICS = .TRUE.  # needed for WAVEDER file
LPEAD = .TRUE.
OMEGAMAX = 40

KPOINTS

The KPOINTS file will be automatically generated in this example.


Calculation

  • In this example we will calculate and plot the first "bright" BSE eigenstate of silicon. In this tutorial the modelBSE setup from the previous tutorial is used in combination with a gamma centered k-point grid (if you don't want to wait that long, a grid takes only a minute). In principle the standard BSE method can also be used instead.
  • The INCAR file for the modelBSE calculation looks like the following:
System  = Si

PREC = Normal ; ENCUT = 250.0

#ALGO = BSE 
ANTIRES = 0
ISMEAR = 0 ; SIGMA = 0.01
ENCUTGW = 150

EDIFF = 1.E-8 # default 1.E-4
NBANDS = 16   # only bands that are used are required, prepare the same set in a forgoing DFT run
NBANDSO = 4
NBANDSV = 8
OMEGAMAX = 20

PRECFOCK = Normal

ALGO = TDHF
LMODELHF = .TRUE. #Turn model on 
HFSCREEN = 1.26  # Screening lenght
AEXX = 0.088    #Inverse of epsilon_infinity
SCISSOR = 0.69  # Difference GW-DFT band gap

NBSEEIG = 10 # number of BSE eigenvectors written out in BSEFATBAND
  • The important tag for fatband calculations is NBSEEIG. In this example this will write the 10 energetically lowest BSE eigenvectors to the output file BSEFATBAND.

Download

Si_improve_eps.tgz

References

Cite error: <ref> tag with name "bokdam:scr:6" defined in <references> has group attribute "" which does not appear in prior text.


Back to the main page